GE Haliade-X 12 MW supplies power

The GE Haliade-X 12 MW has delivered its very first kilowatt hours. The prototype of the world’s most powerful offshore wind turbine has now entered its test phase on the Maasvlakte in Rotterdam. The data collected during this phase will be used to obtain the required certificate in 2020. Subsequently, the serial production of the largest and most efficient wind turbine can start.

Key figures for the Haliade-X 12 MW

Capacity: 12 MW
Rotor diameter: 220 m
Blade length: 107 m
Hub height: 150 m
Tip height: 260 m
Wind turbine swept area: 38,000 m2
Annual energy yield: approx. 67 GWh

General information

Pondera Development and SIF Holding, together with GE Renewable Energy, are developing the Haliade-X on the Maasvlakte 2 in Rotterdam. The development of the innovative Haliade-X project in Rotterdam has been made possible thanks to Pondera’s extensive knowledge and many years of experience in Dutch wind energy legislation and regulatory policy. The increase in size and scale of (offshore) wind turbines is an important step in generating more sustainable energy, accelerating the energy transition and thereby limiting the effects of climate change.

The offshore wind turbine prototype will be installed onshore in order to ease access for testing and monitoring purposes. This will also allow GE to collect the data needed to obtain the Type Certificate, a key step in commercializing the Haliade-X.

The Haliade-X can generate 67 GWh of electricity annually. That is enough power for 16,000 European households and thus saves 42 megatons of CO2. In the fall of 2019, the Haliade-X will generate renewable energy on the SIF site on the Maasvlakte.


 

World’s most powerful wind turbine completely installed!

All three blades of the GE Haliade-X 12 MW are installed. The commissioning of the world’s largest and most powerful wind turbine will be completed in the coming weeks.

Key figures for the Haliade-X 12 MW

Capacity: 12 MW
Rotor diameter: 220 m
Blade length: 107 m
Hub height: 150 m
Tip height: 260 m
Wind turbine swept area: 38,000 m2
Annual energy yield: approx. 67 GWh

General information

Pondera Development and SIF Holding, together with GE Renewable Energy, are developing the Haliade-X on the Maasvlakte 2 in Rotterdam. The development of the innovative Haliade-X project in Rotterdam has been made possible thanks to Pondera’s extensive knowledge and many years of experience in Dutch wind energy legislation and regulatory policy. The increase in size and scale of (offshore) wind turbines is an important step in generating more sustainable energy, accelerating the energy transition and thereby limiting the effects of climate change.

The offshore wind turbine prototype will be installed onshore in order to ease access for testing and monitoring purposes. This will also allow GE to collect the data needed to obtain the Type Certificate, a key step in commercializing the Haliade-X.

The Haliade-X can generate 67 GWh of electricity annually. That is enough power for 16,000 European households and thus saves 42 megatons of CO2. In the fall of 2019, the Haliade-X will generate renewable energy on the SIF site on the Maasvlakte.


 

Installation of GE Haliade’s blades has started!

We are happy to announce that the installation of the first two blades of the GE Haliade-X 12 MW prototype has started. The third blade has yet to arrive at the Maasvlakte Rotterdam.

Key figures for the Haliade-X 12 MW

Capacity: 12 MW
Rotor diameter: 220 m
Blade length: 107 m
Hub height: 150 m
Tip height: 260 m
Wind turbine swept area: 38,000 m2
Annual energy yield: approx. 67 GWh

General information

Pondera Development and SIF Holding, together with GE Renewable Energy, are developing the Haliade-X on the Maasvlakte 2 in Rotterdam. The development of the innovative Haliade-X project in Rotterdam has been made possible thanks to Pondera’s extensive knowledge and many years of experience in Dutch wind energy legislation and regulatory policy. The increase in size and scale of (offshore) wind turbines is an important step in generating more sustainable energy, accelerating the energy transition and thereby limiting the effects of climate change.

The offshore wind turbine prototype will be installed onshore in order to ease access for testing and monitoring purposes. This will also allow GE to collect the data needed to obtain the Type Certificate, a key step in commercializing the Haliade-X.

The Haliade-X can generate 67 GWh of electricity annually. That is enough power for 16,000 European households and thus saves 42 megatons of CO2. In the fall of 2019, the Haliade-X will generate renewable energy on the SIF site on the Maasvlakte.

NACELLE INSTALLED ON GE HALIADE-X 12 MW TURBINE

The Nacelle of the largest offshore wind turbine in the world GE Haliade-X 12 MW has been successfully installed at the Maasvlakte in Rotterdam.

Key figures for the Haliade-X 12 MW

Capacity: 12 MW
Rotor diameter: 220 m
Blade length: 107 m
Hub height: 150 m
Tip height: 260 m
Wind turbine swept area: 38,000 m2
Annual energy yield: approx. 67 GWh

General information

Pondera Development and SIF Holding, together with GE Renewable Energy, are developing the Haliade-X on the Maasvlakte 2 in Rotterdam. The development of the innovative Haliade-X project in Rotterdam has been made possible thanks to Pondera’s extensive knowledge and many years of experience in Dutch wind energy legislation and regulatory policy. The increase in size and scale of (offshore) wind turbines is an important step in generating more sustainable energy, accelerating the energy transition and thereby limiting the effects of climate change.

The offshore wind turbine prototype will be installed onshore in order to ease access for testing and monitoring purposes. This will also allow GE to collect the data needed to obtain the Type Certificate, a key step in commercializing the Haliade-X.

The Haliade-X can generate 67 GWh of electricity annually. That is enough power for 16,000 European households and thus saves 42 megatons of CO2. In the fall of 2019, the Haliade-X will generate renewable energy on the SIF site on the Maasvlakte.

GE UNVEILS THE FIRST HALIADE-X 12 MW NACELLE

GE Renewable Energy has unveiled the nacelle of the world’s most powerful offshore wind turbine, the Haliade-X 12 MW. This unit will be shipped in the coming weeks from Saint-Nazaire (FR) to Rotterdam (NL) to join the tower already built on the Maasvlakte 2.
The wind turbine blades, manufactured by LM Wind Power in Cherbourg, will be shipped to the prototype site to complete the installation.

The video below shows the Haliade-X nacelle rolling out of the factory:

Key figures for the Haliade-X 12 MW

Capacity: 12 MW
Rotor diameter: 220 m
Blade length: 107 m
Hub height: 150 m
Tip height: 260 m
Wind turbine swept area: 38,000 m2
Annual energy yield: approx. 67 GWh

General information

Pondera Development and SIF Holding, together with GE Renewable Energy, are developing the Haliade-X on the Maasvlakte 2 in Rotterdam. The development of the innovative Haliade-X project in Rotterdam has been made possible thanks to Pondera’s extensive knowledge and many years of experience in Dutch wind energy legislation and regulatory policy. The increase in size and scale of (offshore) wind turbines is an important step in generating more sustainable energy, accelerating the energy transition and thereby limiting the effects of climate change.

The offshore wind turbine prototype will be installed onshore in order to ease access for testing and monitoring purposes. This will also allow GE to collect the data needed to obtain the Type Certificate, a key step in commercializing the Haliade-X.

The Haliade-X can generate 67 GWh of electricity annually. That is enough power for 16,000 European households and thus saves 42 megatons of CO2. In the fall of 2019, the Haliade-X will generate renewable energy on the SIF site on the Maasvlakte.

GROUNDBREAKING CEREMONY AT FUTURE HALIADE-X 12 MW PROTOTYPE SITE IN ROTTERDAM

Future Wind (the Joint Venture between Pondera Development and SIF Holding Netherlands) organized a symbolic ground-breaking event that took place in Maasvlakte, Rotterdam, to celebrate the start of preparatory activities to host GE’s Haliade-X 12 MW prototype in Maasvlakte, Rotterdam. The first activities on the ground started early this year with the construction of the Haliade-X 12MW foundation, that will contain 50 piles that will be covered by a 28-meter long foundation plate. Activities to prepare foundation will continue until the arrival of Haliade-X 12 MW nacelle, blades and tower prototype parts later in the summer.

Alderman Arno Bonte joined the ceremony and stressed the importance of this project for the Municipality and the Port of Rotterdam. ”This special offshore wind turbine symbolises the transition from a fossil based economy towards an economy based on renewables. Wind energy at sea will be one of the main power sources in the Netherlands for the coming decades and the Rotterdam city and harbour is ready to play an important role in this transition.”

Hans Rijntalder and Diederik de Bruin, managers Future Wind “We are very pleased to accommodate the Haliade X-12MW, it marks a new step in offshore wind and supports the purpose of Sif and Pondera to encourage the improvement of the wind energy sector”. 

Vincent Schellings, CTO and General Manager Product Management for GE’s Renewable Energy Offshore Wind business and leader of the Haliade-X 12 MW project said, “We are very excited about our prototype in Rotterdam, and we are on schedule to install the biggest and more powerful wind turbine in the world, that will contribute to make offshore wind energy more competitive.”

This Haliade-X 12 MW prototype will be installed onshore to facilitate access for testing. During the initial period of operations, it will allow GE Renewable Energy to collect data needed to obtain the Type Certificate in 2020 and ship the first commercial units in 2021.

GE’s Haliade-X 12 MW is currently being assembled at GE’s factory in Saint-Nazaire, France, while its three LM Wind Power-designed 107-metre blades are being manufactured in Cherbourg, France, and tower sections produced in Seville, Spain. All components will be shipped to Rotterdam, where pre-assembly work and installation will take place.

This prototype in Rotterdam is part of the $400 (€320) million investment in the Haliade-X development announced by GE Renewable Energy in March 2018 to help reduce offshore wind’s cost of energy in order to make it a more competitive source of clean, renewable energy.

Early this year GE Renewable Energy and Future Wind announced that they signed an agreement to install the first Haliade-X 12 MW wind turbine prototype in Maasvlakte-Rotterdam (NL) during summer 2019. The deal includes five years of testing and a 15-year full-service Operation and Maintenance agreement.