maasvlakte – Future Wind

World record for Haliade-X 12 MW!

Pondera’s Haliade-X 12 MW prototype in Port of Rotterdam has just set a new world record! It is the first wind turbine ever to generate 288 MWh over the course of 24 hours. In the next 5 years, the Haliade-X prototype will undergo a series of tests to validate the turbine’s power curve, loads, grid performance & reliability. In addition, these tests will allow GE to collect the data needed to obtain the Type Certificate, a key step in commercializing the Haliade-X.

Key figures for the Haliade-X 12 MW

Capacity: 12 MW
Rotor diameter: 220 m
Tip height: 245 m
Blade length: 107 m
Annual energy yield: 46.3 GWh
Wind turbine swept area: 38,000 m²
(These numbers are based on the SDE wind report)

General information

Pondera Development and SIF Holding, together with GE Renewable Energy, are developing the Haliade-X on the Maasvlakte 2 in Rotterdam. The development of the innovative Haliade-X project in Rotterdam has been made possible thanks to Pondera’s extensive knowledge and many years of experience in Dutch wind energy legislation and regulatory policy. The increase in size and scale of (offshore) wind turbines is an important step in generating more sustainable energy, accelerating the energy transition and thereby limiting the effects of climate change.

The offshore wind turbine prototype is installed onshore in order to ease access for testing and monitoring purposes. This will also allow GE to collect the data needed to obtain the Type Certificate, a key step in commercializing the Haliade-X.

The Haliade-X can generate 46.3 GWh of electricity annually. That is enough power for 15,900 European households and thus saves 28.1 kilotons of CO₂.

NACELLE INSTALLED ON GE HALIADE-X 12 MW TURBINE

The Nacelle of the largest offshore wind turbine in the world GE Haliade-X 12 MW has been successfully installed at the Maasvlakte in Rotterdam.

Key figures for the Haliade-X 12 MW

Capacity: 12 MW
Rotor diameter: 220 m
Tip height: 245 m
Blade length: 107 m
Annual energy yield: 46.3 GWh
Wind turbine swept area: 38,000 m²
(These numbers are based on the SDE wind report)

General information

The offshore wind turbine prototype will be installed onshore in order to ease access for testing and monitoring purposes. This will also allow GE to collect the data needed to obtain the Type Certificate, a key step in commercializing the Haliade-X.

The Haliade-X can generate 46.3 GWh of electricity annually. That is enough power for 15,900 European households and thus saves 28.1 kilotons of CO₂. In the fall of 2019, the Haliade-X will generate renewable energy on the SIF site on the Maasvlakte.

250 PEOPLE LINE UP FOR THE 107 METER HALIADE-X BLADE

250 people line up in front of the 107 meter blade for the Haliade-X wind turbine. This blade is manufactured by LM Wind Power in Cherbourg, France. The Haliade-X 12 MW prototype is the largest wind turbine in the world, which will be built by Pondera Development and GE.

Haliade-X 12 MW is a multi-million investment that will help reduce offshore wind’s cost of energy in order to make it a more competitive source of clean and renewable energy.

HALIADE-X TOWER SECTIONS ARRIVED AT ROTTERDAM

The four tower sections that will be part of Haliade-X 12 MW prototype to be installed this summer have just arrived at the Port of Rotterdam, where Pondera Development and GE are building the largest wind turbine in the world.

After unloading the tower segments, a series of pre-assembly works will take place, including the installation of some tower segments. Haliade-X 12 MW nacelle and blade components, currently being manufactured in Saint-Nazaire and Cherbourg (France) respectively, will arrive later in the summer to complete the prototype installation. This demo unit will be installed onshore to provide easier access for testing. During the initial period of operations, it will allow GE Renewable Energy to collect data needed to obtain a Type Certificate, a key step to go into serial production in 2021. Haliade-X 12 MW is a multi-million investment that will help that will help reduce offshore wind’s cost of energy in order to make it a more competitive source of clean and renewable energy.

GE’S HALIADE-X 12 MW PROTOTYPE TO BE INSTALLED IN ROTTERDAM

The agreement signed with Future Wind includes five years of testing and 15 years of service
Installation of Haliade-X 12 MW will take place during summer 2019GE Renewable Energy and Future Wind (a Joint Venture between Pondera Development and SIF Holding Netherlands) announced today that they have signed an agreement to install the first Haliade-X 12 MW wind turbine prototype in Maasvlakte-Rotterdam (NL) during summer 2019. The deal includes five years of testing and a 15-year full service Operation and Maintenance agreement.This Haliade-X 12 MW prototype will be installed onshore to facilitate access for testing. During the initial period of operations, it will allow GE Renewable Energy to collect data needed to obtain a Type Certificate, a key step in commercializing the product in 2021.
Allard Castelein, CEO of the Port of Rotterdam said “We are proud that GE Renewable Energyand SIF are using our port as a test location to develop the most powerful offshore windturbine in the world. It confirms the port’s reputation and validates our focus on being an attractive partner for the offshore wind industry as it drives the energy transition.”

Alderman Bonte, responsible for Rotterdam’s Energy Transition, said “In our fight against climate change we need a massive expansion of the number of windfarms at sea. We are delighted that GE has selected the Port of Rotterdam as the test location for the Haliade-X 12 MW, which is the largest wind turbine in the world and can therefore help us accelerate the clean energy transition.”

John Lavelle, VP & CEO of Offshore Wind at GE Renewable Energy said “As we rapidly progress on assembling the Haliade-X prototype, this announcement is a critical step forward for GE and our customers. The port of Rotterdam has been a real partner and provides all the necessary conditions to test the Haliade-X in the most drastic weather conditions”.

Fred van Beers, CEO of Sif Holding Netherlands mentioned “we are very pleased to install the Haliade-X 12 MW on the Sif site in Rotterdam, supporting Sif’s ambition to remain at the forefront of developments in the offshore wind industry. The project also fits Sif’s ambition to become entirely CO2 neutral as the Haliade-X 12 MW will supply carbon-free energy to the electricity grid.

Activities in Rotterdam to prepare the site for future installation have just begun. The nacelle of the Haliade-X 12MW prototype will be assembled in Saint-Nazaire (France), while the three 107 meter-long LM Wind Power blades will be manufactured in Cherbourg (France), and the tower sections will be produced in Seville (Spain). All components will be shipped to Rotterdam, where pre-assembly work and installation will take place.

This prototype in Rotterdam is part of the $400 (€320) million investment in the Haliade-X development announced by GE Renewable Energy in March 2018 to help reduce offshore wind’s cost of energy in order to make it a more competitive source of clean, renewable energy.